50 sq ft/G per coat.
100 sq ft/G per coat
HIGH BUILD WATERPROOFING ADHESIVE COATING
- Easy to apply - brush, roller and squeegee
- Flexible technology
- Fast drying
- Excellent freeze/thaw resistance, UV, adhesion and chemical resistance
- Withstands extreme hot/cold environments
- Provides Waterproof seal and corrosion protection
- Resists cracking, chipping, peeling, impact & abrasion
Liquid Rubber Zavlar is a multi-purpose, medium viscosity liquid specifically designed as an environmentally safe sealant for waterproofing and corrosion protection to both horizontal and vertical surfaces. As a flexible and seamless coating, Zavlar produces a fully adhered chemical and waterproof coating that resists cracking and aging. Liquid Rubber Zavlar is applied as a liquid and when cured forms a flexible elastic membrane able to withstand stresses and vibrations without cracking or peeling from the surface.
Applications include: foundation and roof repairs, waterproofing planter boxes, shower stalls, and small ponds.
Liquid Rubber Zavlar is a single component product that may be
applied using a brush, roller or squeegee, or an airless spray system.
Liquid Rubber Zavlar should be applied to a dry surface, free
of dirt, debris, oil or grease and should not be applied when the
ambient temperature is below 5 C, or if rain is expected within 24
hours of application. The desired thickness is achieved by applying multiple thin coats. With joints or cracks, a fabric reinforcing layer is recommended.
Liquid Rubber Zavlar is to be applied between 0.4-0.7 m2/litre
depending on the required membrane thickness. Typically Zavlar
is cured within 48 hrs. The curing time may vary depending on
temperature and relative humidity.
- Free of Flammable Solvents
- No Voc's
- Low Odour
- Water Based